This large commercial pool heater will save thousands of dollars annually. 

These solar modules are beautiful!  They are mounted on a metal roof.

SMA makes some of the best inverters - they are clean, efficient, and reliable.  This SB4000US inverter mounted in a garage completes a nice money-saving system for the customer. 

This large residential PV system employs two SB5000US inverters.  A/C disconnect is shown below.

Large commercial system.  This is what a combiner box should look like: organized, labeled, high quality components, easy for troubleshooting if necessary.

We work closely with Brevard Community College.  Bruce Hesher (left) and Jesse Beckwith display their solar-powered stereo that they built in an EE class.  This stereo powers the speakers shown and runs on only 2W! 

This system employs SolarWorld 230W modules. These are arguably the highest quality solar panels available; they are perfect. We design every system specifically for each customer. We do not use kits or pre-assembled packages.

This solar pool heater is located directly across the street from the beach!

Our installations on metal roofs are second to none.  Our installations are so good, we warrant them against leaks forever!

We can mount on flat or sloped roofs. 

Our DHW collectors can be mounted horizontally or vertically depending on your roof.

The best location for the collector is directly over the tank, usually over the garage.

This small commercial solar water heating system will provide over 60% of the restaurants hot water needs.  Federal and local incentives made this a great investment as well as a great pollution-saver. 

This customer more than cut his electric bill in half by installing a domestic hot water system and a 2100W PV system.

The small array in the middle powers his pool pump. Note the stagger in the placement of the main array. A detailed shade analysis revealed an 18% increase in power harvest from the main array during several of the winter months.

Nice residential system is comprised of Evergreen 195W modules, UniRac mounting, and SunnyBoy inverter.

This garage/workshop was built for this PV array!  It is beautiful and is sized to reduce the customer's electric bill by 85% annually.  Sharp 216W modules x 36.  Perfect installation

Large commercial PV system.  This customer will virtually eliminate FPL bill and will capture huge rebates for a system that is almost free.  140 PV modules mounted on a metal roof with no roof penetrations!

We designed and built this training unit in cooperation with Brevard Community College.  EE professor Bruce Hesher uses this system in his Renerwable Energy program at BCC.

Who says PV needs to go on a house?  This system on the west coast of Florida is beautiful!

This system is mounted on a north/south roof, tilted toward the south for maximum efficiency.

This family is saving a lot of money each month!

This is a very clean installation.  Notice five hurricane straps and most efficient plumbing scheme.

This family has taken advantage of the sun's energy to heat their home water, heat their pool, and remove heat from their attic space for greater home efficiency and shingle life.

We can normally install your DHW system in one day.

This DHW system was installed on Mercedes Homes in Eagle Harbor.  It was part of an entire house plan to make this house over 30% more efficient!

This is a PVP inverter, 5200W max AC output.  The D/C disconnect is on the left, A/C disconnect (opt.) on the right.

This 3500W system in Satellite Beach, FL consists of 20 Sharp 175 mono-crystalline PV modules.

This residential PV system uses Evergreen 190W modules for a total of 5320W DC.

Here is a beautiful installation on a metal roof. When the electriciy co-op officials inspected this system, they were awed: "We finally found a [solar contractor] who knows what they are doing!" 5070W DC, BP 195W panels

This is how we install on a tile roof. Perfect. Under the tile is a mounting plate with two 3-1/2" stainless steel lag bolts turned directly into the truss. That's over 1100lbs of pull-out strength in this single mount!

Fronius inverters are German-made and have incredible data monitoring capabilities.  They use high-frequency technology may be a good option for your installation.

Our mounting brackets are aluminum, not plastic, and mount directly into trusses with two stainless steel screws.  This is the strongest mounting system available!  We can design and install your system to withstand up to 150mph wind

Large solar heater for residential pool.  Notice 5 hurricane straps, not 3 or 4 like other companies, for best wind protection.  These straps are stainless steel and will never stretch or break!

This is a nice installation of a hot water system.  Our collectors are among the hottest available.  Also, they are built in Jacksonville and can withstand 180mph wind loads!  They are not the cheapest, but they are the best.

This solar collector has been tilted to the south to capture more of the winter sun.

Our mounting brackets are aluminum, not plastic, and mount directly into trusses with two stainless steel screws.  This is the strongest mounting system available!  We can design and install your system to withstand up to 150mph wind

Our domestic hot water solar heaters look like a skylight!

This system is installed and operational in Historic Downtown Melbourne.  During the months of highest solar irradiation, the primary gas heater rarely comes on resulting in significant savings for the restaurant.